Female to Female Jumper Wire (Pack of 10)

A female connector is a connector attached to a wire, cable, or piece of hardware, having one or more recessed holes with electrical terminals inside, and constructed in such a way that a plug with exposed conductors ( male connector ) can be inserted snugly into it to ensure a reliable physical and electrical connection . A female connector is also known as a jack, outlet, or receptacle. This type of connector can be recognized by the fact that, when it is disconnected or removed, the electrical conductors are not directly exposed, and therefore are not likely to make accidental contact with external objects or conductors.

1 pin 2.54 mm Jumper Connector. These 2.54 mm female header are commonly used as low-cost connectors for custom-made cables or perforated prototype PCBs. The standard spacing is the same as on most solderless Breadboard and matches 2.54 mm male header strips. This Female to Female connector is generally used in our controller Boards and Robots.

The most common female connector is a two- or three-prong electrical outlet, also known as a wall outlet. Other often-encountered examples include telephone jacks , the jacks for headsets, the chassis connectors for coaxial cable, and some D-shell connectors for computer serial and parallel ports.

Application:

• Connecting of two male joint.
• Using to adding the sensor to microcontroller.
• Adding to junction without solder.
• Easy to add with female junction.

Specification:

• Pitch length=2.54mm
• Length of connector=300mm